Research Article
Year 2024,
Volume: 8 Issue: 1, 29 - 37, 20.03.2024
Abstract
References
- [1] Grant, L.D.R., Adams, R.D., da Silva L.F.M. (2009). Experimental and Numerical Analysis of Single-Lap Joints for the Automotive Industry. International Journal of Adhesion and Adhesives, 29 (4), 405-413.
- [2] Yang, X., Wang, Z., Xu, M., Zhao, R., Liu, X. (2013). Dramatic mechanical and thermal increments of thermoplastic composites by multi-scale synergetic reinforcement: Carbon fiber and graphene nanoplatelet, Materials and Design, 44, 74–80.
- [3] Rafiee, M.A., Rafiee, J., Wang, Z., Song, H., Yu, Z.Z., Koratkar, N. (2009). Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano, 3 (12), 3884-3890.
- [4] Park, S.W., Kim, B.C., Lee D.G. (2009). Tensile strength of joints bonded with a nano-particle- reinforced adhesive. Journal of Adhesion Science and Technology, 23 (1), 95-113.
- [5] Sihn, S., Ganguli, S., Roy, A.K., Qu, L., Dai, L. (2008). Enhancement of through-thickness thermal conductivity in adhesively bonded joints using aligned carbon nanotubes. Composites Science and Technology, 68, 658-665.
- [6] Hsiao, K.T. (2003). Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites. Nanotechnology, 14 (7), 791-793.
- [7] Tiwari S., Bijwe J., Panier S. (2011). Tribological studies on polyetherimide composites based on carbon fabric with optimized oxidation treatment. Wear, 271, 2252-2260.
- [8] Lou S., Ren G., Zhang H., Cheng B., Chen P. (2022). Effect of Surface Treatment on Properties of Carbon Fiber and Glass Fiber Hybrid Reinforced Composites. Fibers and Polymers, 23; 3225–3231.
- [9] Akpinar S, Çalık A. (2023). The effect of fiber length and structure on joint strength in bonded joints with fiber-reinforced composite adhesive. International Journal of Adhesion & Adhesives, 124; 103365.
- [10] Akpinar S., Akbulut H., Özel A., Avinç Akpinar İ., Kanar B. (2018). Improving the Thermal Cycle Performance of Structural Adhesives Used in Aerospace with Carbon Nanostructure Additives, Tubitak, Project number 114M408.
- [11] ISO 2818 (2009). Plastics- Preparation of test specimens by machining.
- [12] Avinc Akpinar I., Gürses A., Akpinar S., Gultekin K., Akbulut H., Ozel A. (2018). Investigation of Mechanical and Thermal Properties of Nanostructure-Doped Bulk Nanocomposite Adhesives. The Journal of Adhesion, 2018; 94,847-866.
- [13] Gavgali E, Sahin R, Akpinar S. (2021). An investigation of the fatigue performance of adhesively bonded step-lap joints: An experimental and numerical analysis. International Journal of Adhesion & Adhesives, 104; 102736.
Effect of chemical oxidation process on adhesive performance in two component adhesive with nano particle and nano fiber additives
Abstract
In the present study, chemically surface-treated nanoparticles and nanofibers were added to the adhesive to improve the performance of the two-component structural adhesive. In the study, DP460 structural adhesive was used as adhesive, functionalized Multi Walled Carbon Nanotubes (MWCNT-COOH) with COOH and carbon fiber (CF) chemically surface treated with HNO3 solution were used as nanostructures. In the experimental study, eight different parameters were investigated as the nanostructure was (i) undoped, (ii) 1 wt% MWCNT-COOH added, (iii) 1wt%. untreated CF added, (iv) 0.5 wt% chemically treated CF added, (v) 1 wt% chemically treated CF added, (vi) 2 wt% chemically treated CF added, (vii) 0.5 wt% MWCNT-COOH and 0.5 wt% chemically treated CF added, and (viii) 1 wt% MWCNT-COOH and 1wt% chemically treated CF added. According to the results of the study, adding nanoparticles to the adhesive increases the performance of the adhesive by about 12%, while adding nanofibers increases the performance of the adhesive by about 18%. In addition, increasing the inertness and wettability of nanofibers by chemical treatment, as well as the use of nanoparticles and fibers together, significantly increases the performance of the adhesive. In addition, the obtained results were supported by fourier transform infrared spectroscopy (FT-IR) analysis and scanning electron microscopic (SEM) analysis.
References
- [1] Grant, L.D.R., Adams, R.D., da Silva L.F.M. (2009). Experimental and Numerical Analysis of Single-Lap Joints for the Automotive Industry. International Journal of Adhesion and Adhesives, 29 (4), 405-413.
- [2] Yang, X., Wang, Z., Xu, M., Zhao, R., Liu, X. (2013). Dramatic mechanical and thermal increments of thermoplastic composites by multi-scale synergetic reinforcement: Carbon fiber and graphene nanoplatelet, Materials and Design, 44, 74–80.
- [3] Rafiee, M.A., Rafiee, J., Wang, Z., Song, H., Yu, Z.Z., Koratkar, N. (2009). Enhanced mechanical properties of nanocomposites at low graphene content. ACS Nano, 3 (12), 3884-3890.
- [4] Park, S.W., Kim, B.C., Lee D.G. (2009). Tensile strength of joints bonded with a nano-particle- reinforced adhesive. Journal of Adhesion Science and Technology, 23 (1), 95-113.
- [5] Sihn, S., Ganguli, S., Roy, A.K., Qu, L., Dai, L. (2008). Enhancement of through-thickness thermal conductivity in adhesively bonded joints using aligned carbon nanotubes. Composites Science and Technology, 68, 658-665.
- [6] Hsiao, K.T. (2003). Use of epoxy/multiwalled carbon nanotubes as adhesives to join graphite fibre reinforced polymer composites. Nanotechnology, 14 (7), 791-793.
- [7] Tiwari S., Bijwe J., Panier S. (2011). Tribological studies on polyetherimide composites based on carbon fabric with optimized oxidation treatment. Wear, 271, 2252-2260.
- [8] Lou S., Ren G., Zhang H., Cheng B., Chen P. (2022). Effect of Surface Treatment on Properties of Carbon Fiber and Glass Fiber Hybrid Reinforced Composites. Fibers and Polymers, 23; 3225–3231.
- [9] Akpinar S, Çalık A. (2023). The effect of fiber length and structure on joint strength in bonded joints with fiber-reinforced composite adhesive. International Journal of Adhesion & Adhesives, 124; 103365.
- [10] Akpinar S., Akbulut H., Özel A., Avinç Akpinar İ., Kanar B. (2018). Improving the Thermal Cycle Performance of Structural Adhesives Used in Aerospace with Carbon Nanostructure Additives, Tubitak, Project number 114M408.
- [11] ISO 2818 (2009). Plastics- Preparation of test specimens by machining.
- [12] Avinc Akpinar I., Gürses A., Akpinar S., Gultekin K., Akbulut H., Ozel A. (2018). Investigation of Mechanical and Thermal Properties of Nanostructure-Doped Bulk Nanocomposite Adhesives. The Journal of Adhesion, 2018; 94,847-866.
- [13] Gavgali E, Sahin R, Akpinar S. (2021). An investigation of the fatigue performance of adhesively bonded step-lap joints: An experimental and numerical analysis. International Journal of Adhesion & Adhesives, 104; 102736.
There are 13 citations in total.
Details
| Primary Language | English |
|---|---|
| Subjects | Nanotechnology (Other) |
| Journal Section | Research Article |
| Authors | |
| Early Pub Date | February 15, 2024 |
| Publication Date | March 20, 2024 |
| Submission Date | November 3, 2023 |
| Acceptance Date | February 13, 2024 |
| Published in Issue | Year 2024 Volume: 8 Issue: 1 |
