Fuji önölçekli basınca duyarlı filmler (FPPSF)
genellikle biyomekanik uygulamalarda kullanılır. FPPSF'ler genellikle
kalibrasyon yöntemlerine göre kalibre edilir. Bununla birlikte, literatürdeki
araştırmacılar testlerine ve farklı işlemlerine dayanarak farklı kalibrasyon
eğrileri elde ederler. Bu çalışmanın amacı, deneysel olarak FPPSF numuneleri
kullanılarak elde edilen kalibrasyon lekelerini (verilerini) incelemektir.
Numune boyalarının homojenliğini değerlendirmek için gri düzey eş-oluşum
matrisi (GLCM) kullanıldı. Ayrıca, üretilen kalibrasyon verileri de mevcut
literatürde sunulan ilgili kalibrasyon eğrileriyle istatistiksel olarak
karşılaştırılır ve doğrulanır. Sonuç olarak, GLCM'nin enerji özellik
parametresi, üretilen eğrinin doğruluğunu gerçekleştirmek için örneklerin
görüntü düzgünlüğünü kontrol etmek için uygulanabilir.
Resim Homojenlik Ölçümü Fujifilm Önölçekli Basınca Duyarlı Film Kalibrasyon
Kocaeli Üniversitesi
2015/098
Fuji
prescale pressure sensitive films (FPPSF) are generally used in biomechanical
applications to measure the pressure distributions and the contact areas
between two contact surfaces as in coloured stains. FPPSFs are usually
calibrated based on the calibration methods using regression analysis to obtain
a specific calibration curve. However, researchers in literature achieve
different calibration curves based upon their tests and different processes.
The purpose of this study is to examine the calibration stains (data) obtained
experimentally using the FPPSF samples compressed between two smooth flat
surfaces to indicate contact pressures. The gray-level co-occurrence matrix
(GLCM) was used to evaluate the uniformity of the sample stains for
quantitative evaluation of uniform distribution of the sample stains. Moreover,
the generated calibration data is also compared and validated statistically
with the related calibration curves presented in the available literature. As a
result, the parameter of energy property of GLCM can be practicable to check
the image uniformity of samples in order for performing the accuracy of a
generated curve.
Image Uniformity Measurement Fujifilm Prescale Pressure Sensitive Film Calibration
2015/098
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik |
Bölüm | Araştırma Makalesi |
Yazarlar | |
Proje Numarası | 2015/098 |
Yayımlanma Tarihi | 17 Eylül 2021 |
Gönderilme Tarihi | 2 Ağustos 2019 |
Kabul Tarihi | 1 Temmuz 2021 |
Yayımlandığı Sayı | Yıl 2021 Cilt: 10 Sayı: 3 |