Araştırma Makalesi
BibTex RIS Kaynak Göster

Yıl 2020, Cilt: 4 Sayı: 3, 116 - 122, 20.09.2020

Aysema Ünlü Emre Esener Mehmet Fırat

https://doi.org/10.26701/ems.736492
Cited By: 3

Öz

Kaynakça

  • Yoon, J. W., Dick, R. E., & Barlat, F. (2011). A new analytical theory for earing generated from anisotropic plasticity. International Journal of Plasticity, 27(8), 1165-1184.
  • Kuroda, M., & Tvergaard, V. (2000). Forming limit diagrams for anisotropic metal sheets with different yield criteria. International Journal of Solids and Structures, 37(37), 5037-5059.
  • Schmidt, I. (2005). Some comments on formulations of anisotropic plasticity. Computational materials science, 32(3-4), 518-523.
  • Firat, M., Kaftanoglu, B., & Eser, O. (2008). Sheet metal forming analyses with an emphasis on the springback deformation. journal of materials processing technology, 196(1-3), 135-148.
  • Köleoğlu Gürsoy, Ö, & Esener, E. (2019). Malzeme Modellerinin Sac Metal Sonlu Elemanlar Analizi Tahmin Performansına Etkisinin Değerlendirilmesi. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 6(1).
  • Li, X., Yang, Y., Wang, Y., Bao, J., & Li, S. (2002). Effect of the material-hardening mode on the springback simulation accuracy of V-free bending. Journal of Materials Processing Technology, 123(2), 209-211.
  • Banabic, D., Comsa, D. S., Sester, M., Selig, M., Kubli, W., Mattiasson, K., & Sigvant, M. (2008, September). Influence of constitutive equations on the accuracy of prediction in sheet metal forming simulation. In Numisheet (pp. 37-42).
  • Mars, J., Wali, M., Jarraya, A., Dammak, F., & Dhiab, A. (2015). Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations. Thin-Walled Structures, 89, 93-100.
  • Kuwabara, T., Hashimoto, K., Iizuka, E., & Yoon, J. W. (2011). Effect of anisotropic yield functions on the accuracy of hole expansion simulations. Journal of Materials Processing Technology, 211(3), 475-481.
  • Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D. D., Bieler, T. R., & Raabe, D. (2010). Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications. Acta Materialia, 58(4), 1152-1211.
  • Ozsoy, M., Esener, E., Ercan, S., & Firat, M. (2014). Springback predictions of a dual-phase steel considering elasticity evolution in stamping process. Arabian Journal for Science and Engineering, 39(4), 3199-3207.
  • Javanmardi, M. R., & Maheri, M. R. (2019). Extended finite element method and anisotropic damage plasticity for modelling crack propagation in concrete. Finite Elements in Analysis and Design, 165, 1-20.
  • Zhou, R., Roy, A., & Silberschmidt, V. V. (2019). A crystal-plasticity model of extruded AM30 magnesium alloy. Computational Materials Science, 170, 109140.
  • Meng, L., Chen, W., Yan, Y., Kitamura, T., & Feng, M. (2019). Modelling of creep and plasticity deformation considering creep damage and kinematic hardening. Engineering Fracture Mechanics, 218, 106582.
  • Feng, D. C., Ren, X. D., & Li, J. (2018). Cyclic behavior modeling of reinforced concrete shear walls based on softened damage-plasticity model. Engineering Structures, 166, 363-375.
  • Esmaeilpour, R., Kim, H., Park, T., Pourboghrat, F., Xu, Z., Mohammed, B., & Abu-Farha, F. (2018). Calibration of Barlat Yld2004-18P yield function using CPFEM and 3D RVE for the simulation of single point incremental forming (SPIF) of 7075-O aluminum sheet. International Journal of Mechanical Sciences, 145, 24-41.
  • Soare, S. C., & Barlat, F. (2011). A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets. European Journal of Mechanics-A/Solids, 30(6), 807-819.
  • Standard, A. S. T. M. (2011). E8/E8M. Standard test methods for tension testing of metallic materials, 3, 66.
  • Zang, S. L., Thuillier, S., Le Port, A., & Manach, P. Y. (2011). Prediction of anisotropy and hardening for metallic sheets in tension, simple shear and biaxial tension. International Journal of Mechanical Sciences, 53(5), 338-347.
  • Mises R (1913) Mechanics of solids in plastic state. Göttinger Nachrichten Mathematical Physics 4:582–592
  • Hill, R. (1948). A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 193(1033), 281-297.
  • Hill, R. (1993). A user-friendly theory of orthotropic plasticity in sheet metals. International Journal of Mechanical Sciences, 35(1), 19-25.
  • Barlat, F., & Lian, K. (1989). Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions. International journal of plasticity, 5(1), 51-66.
  • Hu, W. (2003). Characterized behaviors and corresponding yield criterion of anisotropic sheet metals. Materials Science and Engineering: A, 345(1-2), 139-144.

Evaluation of Plasticity Models Using Uniaxial Tensile Test

Yıl 2020, Cilt: 4 Sayı: 3, 116 - 122, 20.09.2020

Aysema Ünlü Emre Esener Mehmet Fırat

https://doi.org/10.26701/ems.736492
Cited By: 3

Öz

In this study, it is aimed to evaluate plasticity model prediction performance for plastic behavior of materials using a uniaxial tensile test. For this purpose, von Mises, Hill-48, Hill-93, Barlat-89 and Hu -2003 plasticity models are studied, and DC04, DP780, 6000 series aluminum alloy are used as materials. Tensile tests are performed with three directions (rolling, diagonal, transverse), and mechanical properties of materials are obtained. In addition, anisotropy coefficients of materials are calculated by uniaxial tensile tests. Validation of plasticity models is performed using obtained material parameters. Yield locus and yield stresses-anisotropy coefficients depends on directions are used in evaluation of plasticity models. As a result of this study, Hu-2003 showed the best modeling performance for all materials.

Anahtar Kelimeler

Plasticity Modeling Tensile Test Anisotropy Yield Locus

Kaynakça

  • Yoon, J. W., Dick, R. E., & Barlat, F. (2011). A new analytical theory for earing generated from anisotropic plasticity. International Journal of Plasticity, 27(8), 1165-1184.
  • Kuroda, M., & Tvergaard, V. (2000). Forming limit diagrams for anisotropic metal sheets with different yield criteria. International Journal of Solids and Structures, 37(37), 5037-5059.
  • Schmidt, I. (2005). Some comments on formulations of anisotropic plasticity. Computational materials science, 32(3-4), 518-523.
  • Firat, M., Kaftanoglu, B., & Eser, O. (2008). Sheet metal forming analyses with an emphasis on the springback deformation. journal of materials processing technology, 196(1-3), 135-148.
  • Köleoğlu Gürsoy, Ö, & Esener, E. (2019). Malzeme Modellerinin Sac Metal Sonlu Elemanlar Analizi Tahmin Performansına Etkisinin Değerlendirilmesi. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi, 6(1).
  • Li, X., Yang, Y., Wang, Y., Bao, J., & Li, S. (2002). Effect of the material-hardening mode on the springback simulation accuracy of V-free bending. Journal of Materials Processing Technology, 123(2), 209-211.
  • Banabic, D., Comsa, D. S., Sester, M., Selig, M., Kubli, W., Mattiasson, K., & Sigvant, M. (2008, September). Influence of constitutive equations on the accuracy of prediction in sheet metal forming simulation. In Numisheet (pp. 37-42).
  • Mars, J., Wali, M., Jarraya, A., Dammak, F., & Dhiab, A. (2015). Finite element implementation of an orthotropic plasticity model for sheet metal in low velocity impact simulations. Thin-Walled Structures, 89, 93-100.
  • Kuwabara, T., Hashimoto, K., Iizuka, E., & Yoon, J. W. (2011). Effect of anisotropic yield functions on the accuracy of hole expansion simulations. Journal of Materials Processing Technology, 211(3), 475-481.
  • Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D. D., Bieler, T. R., & Raabe, D. (2010). Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications. Acta Materialia, 58(4), 1152-1211.
  • Ozsoy, M., Esener, E., Ercan, S., & Firat, M. (2014). Springback predictions of a dual-phase steel considering elasticity evolution in stamping process. Arabian Journal for Science and Engineering, 39(4), 3199-3207.
  • Javanmardi, M. R., & Maheri, M. R. (2019). Extended finite element method and anisotropic damage plasticity for modelling crack propagation in concrete. Finite Elements in Analysis and Design, 165, 1-20.
  • Zhou, R., Roy, A., & Silberschmidt, V. V. (2019). A crystal-plasticity model of extruded AM30 magnesium alloy. Computational Materials Science, 170, 109140.
  • Meng, L., Chen, W., Yan, Y., Kitamura, T., & Feng, M. (2019). Modelling of creep and plasticity deformation considering creep damage and kinematic hardening. Engineering Fracture Mechanics, 218, 106582.
  • Feng, D. C., Ren, X. D., & Li, J. (2018). Cyclic behavior modeling of reinforced concrete shear walls based on softened damage-plasticity model. Engineering Structures, 166, 363-375.
  • Esmaeilpour, R., Kim, H., Park, T., Pourboghrat, F., Xu, Z., Mohammed, B., & Abu-Farha, F. (2018). Calibration of Barlat Yld2004-18P yield function using CPFEM and 3D RVE for the simulation of single point incremental forming (SPIF) of 7075-O aluminum sheet. International Journal of Mechanical Sciences, 145, 24-41.
  • Soare, S. C., & Barlat, F. (2011). A study of the Yld2004 yield function and one extension in polynomial form: A new implementation algorithm, modeling range, and earing predictions for aluminum alloy sheets. European Journal of Mechanics-A/Solids, 30(6), 807-819.
  • Standard, A. S. T. M. (2011). E8/E8M. Standard test methods for tension testing of metallic materials, 3, 66.
  • Zang, S. L., Thuillier, S., Le Port, A., & Manach, P. Y. (2011). Prediction of anisotropy and hardening for metallic sheets in tension, simple shear and biaxial tension. International Journal of Mechanical Sciences, 53(5), 338-347.
  • Mises R (1913) Mechanics of solids in plastic state. Göttinger Nachrichten Mathematical Physics 4:582–592
  • Hill, R. (1948). A theory of the yielding and plastic flow of anisotropic metals. Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences, 193(1033), 281-297.
  • Hill, R. (1993). A user-friendly theory of orthotropic plasticity in sheet metals. International Journal of Mechanical Sciences, 35(1), 19-25.
  • Barlat, F., & Lian, K. (1989). Plastic behavior and stretchability of sheet metals. Part I: A yield function for orthotropic sheets under plane stress conditions. International journal of plasticity, 5(1), 51-66.
  • Hu, W. (2003). Characterized behaviors and corresponding yield criterion of anisotropic sheet metals. Materials Science and Engineering: A, 345(1-2), 139-144.
Toplam 24 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Makine Mühendisliği
Bölüm Research Article
Yazarlar

Aysema Ünlü Bu kişi benim 0000-0002-4288-6212

Emre Esener 0000-0001-5854-4834

Mehmet Fırat 0000-0002-3973-4736

Yayımlanma Tarihi 20 Eylül 2020
Kabul Tarihi 20 Haziran 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 4 Sayı: 3

Kaynak Göster

APA Ünlü, A., Esener, E., & Fırat, M. (2020). Evaluation of Plasticity Models Using Uniaxial Tensile Test. European Mechanical Science, 4(3), 116-122. https://doi.org/10.26701/ems.736492
AMA Ünlü A, Esener E, Fırat M. Evaluation of Plasticity Models Using Uniaxial Tensile Test. EMS. Eylül 2020;4(3):116-122. doi:10.26701/ems.736492
Chicago Ünlü, Aysema, Emre Esener, ve Mehmet Fırat. “Evaluation of Plasticity Models Using Uniaxial Tensile Test”. European Mechanical Science 4, sy. 3 (Eylül 2020): 116-22. https://doi.org/10.26701/ems.736492.
EndNote Ünlü A, Esener E, Fırat M (01 Eylül 2020) Evaluation of Plasticity Models Using Uniaxial Tensile Test. European Mechanical Science 4 3 116–122.
IEEE A. Ünlü, E. Esener, ve M. Fırat, “Evaluation of Plasticity Models Using Uniaxial Tensile Test”, EMS, c. 4, sy. 3, ss. 116–122, 2020, doi: 10.26701/ems.736492.
ISNAD Ünlü, Aysema vd. “Evaluation of Plasticity Models Using Uniaxial Tensile Test”. European Mechanical Science 4/3 (Eylül 2020), 116-122. https://doi.org/10.26701/ems.736492.
JAMA Ünlü A, Esener E, Fırat M. Evaluation of Plasticity Models Using Uniaxial Tensile Test. EMS. 2020;4:116–122.
MLA Ünlü, Aysema vd. “Evaluation of Plasticity Models Using Uniaxial Tensile Test”. European Mechanical Science, c. 4, sy. 3, 2020, ss. 116-22, doi:10.26701/ems.736492.
Vancouver Ünlü A, Esener E, Fırat M. Evaluation of Plasticity Models Using Uniaxial Tensile Test. EMS. 2020;4(3):116-22.

Cited By

On the Hu 2003 Plasticity Criterion
Journal of Materials Engineering and Performance
https://doi.org/10.1007/s11665-023-08700-z
Tensile Test Evaluation Using Vision Extender and Image Processing
SSRN Electronic Journal
https://doi.org/10.2139/ssrn.4121113
A New Approach for Evaluation True Stress–Strain Curve from Tensile Specimens for DC04 Steel with Vision Measurement in the Post-Necking Phases
Materials
https://doi.org/10.3390/ma16020558

Dergi TR Dizin'de Taranmaktadır.

Flag Counter