Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2021, Cilt: 4 Sayı: 1, 96 - 110, 30.04.2021
https://doi.org/10.35377/saucis.04.01.763070

Öz

Kaynakça

  • I. Vera and L. Langlois, ”Energy indicators for sustainable development,” Energy, vol. 32, pp. 875-882, 2007.
  • M. Melikoglu, and M. Geothermal, “Energy in Turkey and around the World: A review of the literature and an analysis based on Turkey's Vision 2023 energy targets,” Renewable and Sustainable Energy Reviews, vol. 76, pp. 485-492, 2017.
  • A.K. Rajak, and S.D. Kore, “Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process”, Journal of Manufacturing Processes, vol. 26, pp. 57-66, 2017.
  • S. Madhusoodhanan, K. Mainali, A.K. Tripathi, A. Kadavelugu, D. Patel, and S. Bhattacharya, “Power loss analysis of medium-voltage three-phase converters using 15-kV/40-A SiC N-IGBT,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, pp. 902-917, 2016.
  • İ. B. Kara, “2013-2017 yılları arasında artvin il merkezinde meydana gelen bina yangınlarının incelenmesi”, Doğ. Afet Çev. Dergisi, vol. 4, pp.105-114, 2018.
  • J. Ruan, Q. Zhan, L. Tang, and K. Tang, “Real-time temperature estimation of three-core medium-voltage cable joint based on support vector regression,” Energies, vol. 11, no. 6, pp. 1405, 2018.
  • J.H. Shazly, M.A. Mostafa, D.K. Ibrahim, and E.E.A. El Zahab, “Thermal analysis of high-voltage cables with several types of insulation for different configurations in the presence of harmonics,” IET Generation, Transmission Distribution, vol.11, pp.3439-3448, 2017.
  • P.Y. Wang, H. Ma, G. Liu, Z.Z. Han, D.M. Guo, T. Xu, and L.Y. Kang, “Dynamic thermal analysis of high-voltage power cable insulation for cable dynamic thermal rating,” IEEE Access, vol. 7, pp. 56095-56106, 2019.
  • Q. Mei, W. Schoenmaker, S.H. Weng, H. Zhuang, C.K. Cheng, and Q. Chen, “An efficient transient electro-thermal simulation framework for power integrated circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 35, pp. 832-843, 2016.
  • D. Xiao, C. Zhou, Q. Ma, J. Lei, and X. Du, “Wearable Intelligent Warning System for Approaching High-voltage Electrical Equipment,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 12, pp. 9389-9397, 2020.
  • X. Zhou, J. Cao, S. Wang, Y. Jiang, T. Li, and Y. Zou, “Simulation of electric field around typical defects in 110kV XLPE power cable joints,” 2017 International Conference on Circuits, Devices and Systems (ICCDS), 2017.
  • B. Ren, C.T. Wu, and D. Lyu, ”An h-adaptive meshfree-enriched finite element method based on convex approximations for the three-dimensional ductile crack propagation simulation,” Computer Aided Geometric Design, vol. 76, pp. 101795, 2020.
  • E.A. Rodrigues, O.L. Manzoli, L.A. Bitencourt, T.N. Bittencourt, and M. Sánchez, “An adaptive concurrent multiscale model for concrete based on coupling finite elements,” Computer Methods in Applied Mechanics and Engineering, vol. 328, pp. 26-46, 2018.
  • X. Song, V. Pickert, B. Ji, R.T. Naayagi, C. Wang, and Y. Yerasimou, “Questionnaire-Based Discussion of Finite Element Multiphysics Simulation Software in Power Electronics,” IEEE Transactions on Power Electronics, vol.18, pp. 7010-7020, 2018.
  • G. Dagastine, “Numerical simulation-based topology optimization leads to better cooling of electronic components in toyota hybrid vehicles,” Special Advertising Section to IEEE Spectrum: Multiphysics Simulation, 2012.
  • M.F. Moulkı, and M. Khashab, “Haptic Servo System”, Dissertation, 2015.
  • A. Hassani, M. Veyskarami, A. Al-Ajmi, and M. Masihi, “A modified method for predicting the stresses around producing boreholes in an isotropic in-situ stress field,” International Journal of Rock Mechanics and Mining Sciences, vol. 96,pp. 85-93, 2017.
  • Y.L. Hao, D.L. Gong, T. Li, H.L. Wang, J.M. Cairney, Y.D. Wang, and R. Yang, “Continuous and reversible atomic rearrangement in a multifunctional titanium alloy,” Materialia, vol. 2, pp. 1-8, 2018.
  • R.A. Heindl, and L.E. Mong, “Young’s Modulus of Elasticity, Strenght and Extensibility of Refractories in Tension,” Part of Journal of Research of the National Bureau of Standards, vol. 17, pp.469-470, 1936.
  • K. Kese, P.A. Olsson, and A. Holston, “Broitman, E. High temperature nanoindentation hardness and Young's modulus measurement in a neutron-irradiated fuel cladding material,” Journal of Nuclear Materials, vol. 487, pp. 113-120, 2017.
  • I. Zlotnikov, E. Zolotoyabko, and P. Fratzl, “Nano-scale modulus mapping of biological composite materials: Theory and practice.” Progress in Materials Science, vol. 87, pp. 292-320, 2017.
  • X. Zhao, C. Liu, C. Xu, G. Xu, Y. Zhang, S. Tan,, and Y. Han, “The effects of Ca2+ and Y3+ ions co-doping on reducing infrared emissivity of ceria at high temperature,” Infrared Physics Technology, vol. 92, pp.454-458, 2018.
  • S. Çevikalp, “Yüksek Basınçlı Sistemlerde Cıvata Üzerindeki Gerilmenin Burç Boyuna Göre Analizi ve Optimum Burç Boyunun Analiz Edilmesi,” Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, İstanbul, 2016.
  • S.S. Rao, “The finite element method in engineering”, Butterworth-heinemann, 2017.
  • M.N. Özişik, H.R. Orlande, M.J. Colaço, and R.M. Cotta, “Finite difference methods in heat transfer”, CRC press, 2017.
  • D. Pepper and J. Heinrich, “The Finite Element Method: Basic Concepts and Applications with MATLAB,” MAPLE, and COMSOL, CRC Press, 2017.
  • L. Monforte, M. Arroyo, J.M. Carbonell, and A. Gens, “Numerical simulation of undrained insertion problems in geotechnical engineering with the Particle Finite Element Method (PFEM),” Computers and Geotechnics vol. 82, pp. 144-156, 2017.
  • L.A. Bitencourt, O.L. Manzoli, P.G. Prazeres, E.A. Rodrigues, and T.N. Bittencourt, “A coupling technique for non-matching finite element meshes,” Computer Methods in Applied Mechanics and Engineering, vol. 290, pp. 19-44, 2015.
  • A. Dalcalı, O. Çetin, C. Ocak, and F. Temurtaş, “Prediction of the Force on a Projectile in an Electromagnetic Launcher Coil with Multilayer Neural Network,” Sakarya University Journal of Computer and Information Sciences, vol. 1, no. 3, pp. 1-10, 2018.

Electrical-Thermal-Mechanical Analysis of Cable Connection with Screw-Connected Terminal Strips Using Finite Element Method

Yıl 2021, Cilt: 4 Sayı: 1, 96 - 110, 30.04.2021
https://doi.org/10.35377/saucis.04.01.763070

Öz

Electric energy passes through many stages from production to usage, and many electrical connections take place at these stages. Electrical connections are quite important for system safety and electrical energy quality. In this study, current-temperature relationship in the cable was investigated in cable joints made with screw connection terminals, depending on torque applied to screw. In numerical solution of the problem, Comsol Multiphysics program based on Finite Element Method was used first, the screw-conductor interface was investigated based on applied torque, and then electrical-thermal analysis was performed on this geometry. Experimental studies were carried out to demonstrate accuracy of digital model, and conductors and terminals used in household installations were taken into account in these studies. Amount of deformation of conductors depending on torque applied to screw and its effect to current carrying capacity of these terminals having screw connection were investigated. In this study, the appropriate torque value is 0.4 Nm, and the maximum temperature value is 45 oC on contact surface. Also, it has been shown that the optimum torque value to be applied in the copper conductor cable joint with 1.5 mm2 cross section area is 0.4 Nm.

Kaynakça

  • I. Vera and L. Langlois, ”Energy indicators for sustainable development,” Energy, vol. 32, pp. 875-882, 2007.
  • M. Melikoglu, and M. Geothermal, “Energy in Turkey and around the World: A review of the literature and an analysis based on Turkey's Vision 2023 energy targets,” Renewable and Sustainable Energy Reviews, vol. 76, pp. 485-492, 2017.
  • A.K. Rajak, and S.D. Kore, “Experimental investigation of aluminium–copper wire crimping with electromagnetic process: Its advantages over conventional process”, Journal of Manufacturing Processes, vol. 26, pp. 57-66, 2017.
  • S. Madhusoodhanan, K. Mainali, A.K. Tripathi, A. Kadavelugu, D. Patel, and S. Bhattacharya, “Power loss analysis of medium-voltage three-phase converters using 15-kV/40-A SiC N-IGBT,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. 4, pp. 902-917, 2016.
  • İ. B. Kara, “2013-2017 yılları arasında artvin il merkezinde meydana gelen bina yangınlarının incelenmesi”, Doğ. Afet Çev. Dergisi, vol. 4, pp.105-114, 2018.
  • J. Ruan, Q. Zhan, L. Tang, and K. Tang, “Real-time temperature estimation of three-core medium-voltage cable joint based on support vector regression,” Energies, vol. 11, no. 6, pp. 1405, 2018.
  • J.H. Shazly, M.A. Mostafa, D.K. Ibrahim, and E.E.A. El Zahab, “Thermal analysis of high-voltage cables with several types of insulation for different configurations in the presence of harmonics,” IET Generation, Transmission Distribution, vol.11, pp.3439-3448, 2017.
  • P.Y. Wang, H. Ma, G. Liu, Z.Z. Han, D.M. Guo, T. Xu, and L.Y. Kang, “Dynamic thermal analysis of high-voltage power cable insulation for cable dynamic thermal rating,” IEEE Access, vol. 7, pp. 56095-56106, 2019.
  • Q. Mei, W. Schoenmaker, S.H. Weng, H. Zhuang, C.K. Cheng, and Q. Chen, “An efficient transient electro-thermal simulation framework for power integrated circuits,” IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 35, pp. 832-843, 2016.
  • D. Xiao, C. Zhou, Q. Ma, J. Lei, and X. Du, “Wearable Intelligent Warning System for Approaching High-voltage Electrical Equipment,” IEEE Transactions on Instrumentation and Measurement, vol. 69, no. 12, pp. 9389-9397, 2020.
  • X. Zhou, J. Cao, S. Wang, Y. Jiang, T. Li, and Y. Zou, “Simulation of electric field around typical defects in 110kV XLPE power cable joints,” 2017 International Conference on Circuits, Devices and Systems (ICCDS), 2017.
  • B. Ren, C.T. Wu, and D. Lyu, ”An h-adaptive meshfree-enriched finite element method based on convex approximations for the three-dimensional ductile crack propagation simulation,” Computer Aided Geometric Design, vol. 76, pp. 101795, 2020.
  • E.A. Rodrigues, O.L. Manzoli, L.A. Bitencourt, T.N. Bittencourt, and M. Sánchez, “An adaptive concurrent multiscale model for concrete based on coupling finite elements,” Computer Methods in Applied Mechanics and Engineering, vol. 328, pp. 26-46, 2018.
  • X. Song, V. Pickert, B. Ji, R.T. Naayagi, C. Wang, and Y. Yerasimou, “Questionnaire-Based Discussion of Finite Element Multiphysics Simulation Software in Power Electronics,” IEEE Transactions on Power Electronics, vol.18, pp. 7010-7020, 2018.
  • G. Dagastine, “Numerical simulation-based topology optimization leads to better cooling of electronic components in toyota hybrid vehicles,” Special Advertising Section to IEEE Spectrum: Multiphysics Simulation, 2012.
  • M.F. Moulkı, and M. Khashab, “Haptic Servo System”, Dissertation, 2015.
  • A. Hassani, M. Veyskarami, A. Al-Ajmi, and M. Masihi, “A modified method for predicting the stresses around producing boreholes in an isotropic in-situ stress field,” International Journal of Rock Mechanics and Mining Sciences, vol. 96,pp. 85-93, 2017.
  • Y.L. Hao, D.L. Gong, T. Li, H.L. Wang, J.M. Cairney, Y.D. Wang, and R. Yang, “Continuous and reversible atomic rearrangement in a multifunctional titanium alloy,” Materialia, vol. 2, pp. 1-8, 2018.
  • R.A. Heindl, and L.E. Mong, “Young’s Modulus of Elasticity, Strenght and Extensibility of Refractories in Tension,” Part of Journal of Research of the National Bureau of Standards, vol. 17, pp.469-470, 1936.
  • K. Kese, P.A. Olsson, and A. Holston, “Broitman, E. High temperature nanoindentation hardness and Young's modulus measurement in a neutron-irradiated fuel cladding material,” Journal of Nuclear Materials, vol. 487, pp. 113-120, 2017.
  • I. Zlotnikov, E. Zolotoyabko, and P. Fratzl, “Nano-scale modulus mapping of biological composite materials: Theory and practice.” Progress in Materials Science, vol. 87, pp. 292-320, 2017.
  • X. Zhao, C. Liu, C. Xu, G. Xu, Y. Zhang, S. Tan,, and Y. Han, “The effects of Ca2+ and Y3+ ions co-doping on reducing infrared emissivity of ceria at high temperature,” Infrared Physics Technology, vol. 92, pp.454-458, 2018.
  • S. Çevikalp, “Yüksek Basınçlı Sistemlerde Cıvata Üzerindeki Gerilmenin Burç Boyuna Göre Analizi ve Optimum Burç Boyunun Analiz Edilmesi,” Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi, İstanbul, 2016.
  • S.S. Rao, “The finite element method in engineering”, Butterworth-heinemann, 2017.
  • M.N. Özişik, H.R. Orlande, M.J. Colaço, and R.M. Cotta, “Finite difference methods in heat transfer”, CRC press, 2017.
  • D. Pepper and J. Heinrich, “The Finite Element Method: Basic Concepts and Applications with MATLAB,” MAPLE, and COMSOL, CRC Press, 2017.
  • L. Monforte, M. Arroyo, J.M. Carbonell, and A. Gens, “Numerical simulation of undrained insertion problems in geotechnical engineering with the Particle Finite Element Method (PFEM),” Computers and Geotechnics vol. 82, pp. 144-156, 2017.
  • L.A. Bitencourt, O.L. Manzoli, P.G. Prazeres, E.A. Rodrigues, and T.N. Bittencourt, “A coupling technique for non-matching finite element meshes,” Computer Methods in Applied Mechanics and Engineering, vol. 290, pp. 19-44, 2015.
  • A. Dalcalı, O. Çetin, C. Ocak, and F. Temurtaş, “Prediction of the Force on a Projectile in an Electromagnetic Launcher Coil with Multilayer Neural Network,” Sakarya University Journal of Computer and Information Sciences, vol. 1, no. 3, pp. 1-10, 2018.
Toplam 29 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Yazılım Mühendisliği (Diğer), Elektrik Mühendisliği
Bölüm Makaleler
Yazarlar

Mustafa Tosun 0000-0001-7167-4561

Hüseyin Aksoy 0000-0001-9695-9272

Yayımlanma Tarihi 30 Nisan 2021
Gönderilme Tarihi 2 Temmuz 2020
Kabul Tarihi 25 Şubat 2021
Yayımlandığı Sayı Yıl 2021Cilt: 4 Sayı: 1

Kaynak Göster

IEEE M. Tosun ve H. Aksoy, “Electrical-Thermal-Mechanical Analysis of Cable Connection with Screw-Connected Terminal Strips Using Finite Element Method”, SAUCIS, c. 4, sy. 1, ss. 96–110, 2021, doi: 10.35377/saucis.04.01.763070.

    Sakarya University Journal of Computer and Information Sciences in Applied Sciences and Engineering: An interdisciplinary journal of information science